Project file | |
Ctrl+N | Create new project |
Ctrl+Shft+N | Create new project and bypass the Project Properties dialog |
Alt+F4 | Exit Vegas |
Ctrl+F4 | Close the current project |
Ctrl+O | Open existing project |
Alt+Enter | Project properties |
Ctrl+S | Save project |
Magnification and view | |
Alt+0 | Set focus to track view |
Alt+1 | Show Explorer window (show/hide window if not docked) |
Alt+2 | Show Trimmer window (show/hide window if not docked) |
Alt+3 | Show Mixer window (show/hide window if not docked) |
Alt+4 | Show Video Preview window (show/hide window if not docked) |
Alt+5 | Show Project Media window (show/hide window if not docked) |
Alt+6 | Show Edit Details window (show/hide window if not docked) |
Alt+7 | Show Transitions window (show/hide window if not docked) |
Alt+8 | Show Video FX window (show/hide window if not docked) |
Alt+9 | Show Media Generators window (show/hide window if not docked) |
Ctrl+Alt+1 | Show Plug-In Manager window (show/hide window if not docked) |
Ctrl+Alt+2 | Show Video Scopes window (show/hide window if not docked) |
Ctrl+Alt+3 | Show Surround Panner window (show/hide window if not docked) |
Ctrl+Alt+4 | Show Media Manager window (show/hide window if not docked) |
B | Show/hide audio bus tracks |
Ctrl+Shft+B | Show/hide video bus track |
Ctrl+Shft+K | Show/hide event media markers |
Ctrl+Shft+I | Show/hide active take information |
Ctrl+Shft+W | Show/hide waveforms and frame images on events in the timeline |
Ctrl+Shft+C | Show/hide Event Pan/Crop and Video FX buttons in video events |
Ctrl+Shft+T | Show/hide event fade lengths between selected and nonselected events: |
Ctrl+Shft+O | Toggles the display of the frame under the cursor when you perform edge trimming. For example, when you drag the edge of a video event with this command selected, the Video Preview window will update to draw the last. frame in the event as you drag. When the command is not selected, a static frame is displayed. |
Ctrl+Shft+E | Show/hide envelopes |
F6 or Ctrl+Tab | Show next window |
Shft+F6 or Ctrl+Shft+Tab | Show previous window |
Alt+D, then press 0-9 | Recall window layout |
Ctrl+Alt+D, then press 0-9 | Save window layout |
Tab | Toggle focus between track list and timeline (and bus track list and timeline if bus tracks are visible) |
Alt+Shft+Up/Down Arrow | Switch focus to previous/next track or bus track |
Ctrl+Shft+Down Arrow | Decrease height of all tracks or bus tracks (depending which has focus) |
Ctrl+Shft+Up Arrow | Increase height of all tracks or bus tracks (depending which has focus) |
' | Minimize all tracks |
Ctrl+' | Set track heights to default height |
F11 or Alt+' | Minimize/restore the window docking area |
Ctrl+F11 or Ctrl+Alt+' | Maximize/restore the timeline vertically and horizontally (window docking area and track list will be hidden) |
Shft+F11 or Shft+Alt+' | Minimize/restore the track list |
Up/Down Arrow | Zoom in/out horizontally in small increments (if timeline has focus) |
Ctrl+Up/Down Arrow | Zoom in/out horizontally in large increments or zoom to selection (if one exists) |
Alt + Up Arrow | Zoom in time until each video thumbnail represents one frame |
Shft+Up/Down Arrow | Zoom waveforms in/out vertically (audio only) |
Cursor placement, loop region, and time selection | |
Note | Most of the cursor placement commands, when combined with the Shift key, also perform selection. |
\ | Center view around cursor |
Ctrl+G | Go to |
Ctrl+Shft+G | Set end of time selection |
Home | Go to beginning of time selection or viewable area (if no time selection) |
End | Go to end of time selection or viewable area (if no time selection) |
Ctrl+Home or W | Go to beginning of project |
Ctrl+End | Go to end of project |
Shft+Q | Select loop region |
Backspace | Restore previous five time selections |
Page Up | Move left by grid marks |
Page Down | Move right by grid marks |
Left or Right Arrow | Move left/right one pixel (when Quantize to Frames is turned off) |
Ctrl+Left/Right Arrow | Move to previous/next marker |
Alt+Left or Right Arrow | Move one frame left/right |
Ctrl+Alt+Left/Right Arrow | Move left/right to event edit points (including fade edges) |
F3/F9 | Jog left/right (when not in edge-trimming mode or during playback) |
0-9 keys (not numeric keypad) | Move cursor to corresponding marker or select corresponding region |
Ctrl+Comma | Move to previous CD track |
Ctrl+Period | Move to next CD track |
Comma | Move to previous CD index or region |
Period | Move to next CD index or region |
I (in)and O (out) | Set in and out points |
Ctrl+Shft+drag with mouse | Create time selection while dragging on an event |
General editing | |
Ctrl+X or Shft+Delete | Cut selection |
Ctrl+C or Ctrl+Insert | Copy selection |
Ctrl+V or Shft+Insert | Paste from clipboard |
Ctrl+Shft+V | Paste insert |
Ctrl+B | Paste repeat |
Delete | Delete selection |
Ctrl+T | Trim event to selection |
Ctrl+M | Render to new track |
Ctrl+Z or Alt+Backspace | Undo |
Ctrl+Shft+Z or Ctrl+Y | Redo |
Shft+F5 | Rebuild audio peaks |
Ctrl+D | Switch to normal editing tool |
D | Switch to next editing tool |
Shft+D | Switch to previous editing tool |
Event selection and editing | |
Shft+click events | Range select |
Ctrl+click individual events | Multiple select |
Ctrl+A | Select all |
Ctrl+Shft+A | Unselect all |
Ctrl+X or Shft+Delete | Cut selection |
Ctrl+C or Ctrl+Insert | Copy selection |
Ctrl+V or Shft+Insert | Paste from clipboard |
Ctrl+Shft+V | Paste insert |
Ctrl+B | Paste repeat |
Delete | Delete selection |
S | Split events at cursor |
Ctrl+T | Trim/crop selected events |
Numeric Keypad 7 or [ | Enter edge-trimming mode and select event start; move to previous event edge In this mode, 1, 3, 4, and 6 on the numeric keypad trim the selected event edge. Hold Ctrl while pressing 1, 3, 4, or 6 to time compress/stretch, or hold Alt while pressing 1, 3, 4, or 6 to slip trim, or hold Ctrl+Alt while pressing 1, 3, 4, or 6 to slide a transition or crossfade. |
Numeric Keypad 9 or ] | Enter edge-trimming mode and select event end; move to next event edge. In this mode, 1, 3, 4, and 6 on the numeric keypad trim the selected event edge |
F3/F9 | Trim left/right (when in edge-trimming mode) |
Numeric Keypad 5 | Exit edge-trimming mode |
Numeric Keypad 1/3 | Move or trim selected events one frame left/right |
Numeric Keypad 4/6 | Move or trim selected events one pixel left/right |
Numeric Keypad 8/2 | Move selected events up/down one track |
Alt+drag inside the event | Slip: move media within event without moving the event |
Alt+drag edge of event | Slip trim: moves the media with the edge as it is trimmed |
Ctrl+Alt+drag edge of event | Trim adjacent: trims selected event and adjacent event simultaneously |
Ctrl+Alt+drag middle of event | Slide: trims both ends of event simultaneously |
Ctrl+Alt+drag over a crossfade | Slide crossfade: moves crossfade |
Ctrl+drag edge of event | Stretch (compress) the media in the event while trimming |
= (not numeric keypad) | Raise pitch one semitone |
Ctrl+= | Raise pitch one cent |
Shft+= | Raise pitch one octave |
=- (not numeric keypad) | Lower pitch one semitone |
Ctrl+- | Lower pitch one cent |
Shft+- | Lower pitch one octave |
Ctrl+Shft+= or Ctrl+Shft+- | Reset pitch |
T | Select next take |
Shft+T | Select previous take |
Numeric Keypad / Numeric Keypad * Numeric Ke | Convert cut to transition |
Ctrl+Numeric Keypad / | Convert transition to cut |
Ctrl+E | Open in audio editor |
Red eye reduction | |
Right/Left Arrow | Scroll Left/Right (Press Shift to scroll quickly) |
Up/Down Arrow | Scroll Up/Down (Press Shift to scroll quickly) |
Page Up/Down Shft+Home/End | Jump to top/bottom of image |
Home/End Shft+Page Up/Down | Jump to left/right edge of image |
\ or Numeric Keypad * | Jump to horizontal center of image |
Shft+\ or Shft+Numeric Keypad * | Jump to vertical center of image |
C | Jump to horizontal and vertical center of image |
Playback, recording, and preview | |
Ctrl+Alt+R | Arm track for record track header) |
Ctrl+Alt+Shft+R | Arm for record and set recording path |
Ctrl+R | Record (transport bar) |
Q or Ctrl+Shft+L | Looped playback |
Shft+Spacebar or Shft+F12 | Play from start |
Spacebar | Start playback |
Ctrl+Spacebar or F12 | Play from any window |
Enter or Ctrl+F12 | Play/pause |
Spacebar or Esc | Stop playback |
Ctrl+Home | Go to start of project |
Ctrl+End | Go to end of project |
Ctrl+Shft+F12 | Dim (attenuate) mixer output |
Numeric Keypad 0 | Preview cursor position. |
J, K, or L | Scrub playback |
Shft+M | Selectively prerender video |
Ctrl+Shft+M | Preview in player |
Shft+B | Build dynamic RAM preview |
Alt+Shft+4 | Toggle external monitor preview. |
F7 | Generate MIDI timecode |
Shft+F7 | Generate MIDI clock |
Ctrl+F7 | Trigger from MIDI timecode |
Timeline and track list | |
Ctrl+Q | Insert new audio track |
Ctrl+Shft+Q | Insert new video track |
Left/Right Arrow | Change audio track volume or video track compositing level (when focus is on track list) |
Shft+Left/Right Arrow | Change audio track panning or video track fade-to-color setting (when focus is on track list) |
Z | Mute selected tracks |
Shft+Z | Mute selected track and remove other tracks from mute group |
X | Solo selected tracks |
Shft+X | Solo selected track and remove other tracks from solo group |
Shft+drag | Override snapping |
Alt+F8 | Quantize to frames |
F8 | Enable/disable snapping |
Ctrl+F8 | Snap to grid |
Shft+F8 | Snap to markers |
F | Post-edit ripple affected tracks |
Ctrl+F | Post-edit ripple affected tracks, bus tracks, markers, and regions |
Ctrl+Shft+F | Post-edit ripple all tracks, markers, and regions |
Ctrl+L | Auto ripple mode |
Ctrl+Shft+X | Automatic crossfades |
Ctrl+M | Render to new track |
G | Group selected events |
U | Ungroup selected events |
Ctrl+Shft+U | Ignore event grouping |
Ctrl+U | Clear group without deleting events |
Shft+G | Select all events in group |
V | Insert/show/hide track volume envelope |
Shft+V | Remove track volume envelope |
P | Insert/show/hide track panning envelope |
Shft+P | Remove track panning envelope |
E and Shft+E | Cycle through effect automation envelopes |
Ctrl+Shft+E | Show/hide envelopes |
8 or 2 on the numeric keypad | Adjust envelope point up/down by one pixel (Select envelope point and hold the mouse button) |
4 or 6 on the numeric keypad | Adjust envelope point left /right by one pixel (Select envelope point and hold the mouse button) |
Ctrl+ drag envelope point or segment | Adjust envelope point value in fine increments without changing the point's timeline position |
Ctrl+Alt+ drag envelope point or segment | Adjust envelope point value in normal increments without changing the point's timeline position |
Alt+ drag | Adjust envelope point's timeline position without changing its value |
C | Insert command marker |
M | Insert marker |
R | Insert region |
N | Insert CD track region |
Shft+N | Insert CD track index |
Trimmer commands | |
A | Add media from cursor |
Shft+A | Add media to cursor |
T | Transfer time selection from timeline to Trimmer after cursor |
Shft+T | Transfer time selection from timeline to Trimmer before cursor |
Tab | Toggle selected stream: audio/video/both |
Ctrl+Shft+ Up/Down Arrow | Toggle audio/video stream height |
H | Sort Trimmer history |
Ctrl+Shft+H | Clear Trimmer history |
Ctrl+H | Remove current media from Trimmer history |
S | Save markers/regions |
Shft+S | Toggle automatic marker/region saving |
Ctrl+E | Open in audio editor |
Track motion | |
1-6 (not numeric keypad) | Change 3D layout |
A | Lock aspect ratio |
C | Scale about center |
O | Edit in object space |
X, Y, and Z | Prevent movement |
Shft+X, Shft+Y and Shft+Z | Prevent scaling |
F8 | Enable snapping |
Shft+F8 | Enable rotation |
Surround panner | |
Shft+drag the pan point (only when Move Freely i | Constrain motion to a line through the center of the surround panner |
Alt+drag the pan point (only when Move Freely is | Constrain motion to a constant radius from the center |
Alt+Shft+drag the pan point (only when Move Freel | Constrain motion to the maximum circle that will fit in the Surround Panner |
Up/Down Arrow or Page Up/Page Down or Mouse wheel | Move the pan point forward/back (when the pan point is selected) |
Left/Right Arrow or Shft+Page Up/Page Down or Shi | Move the pan point left/right (when the pan point is selected) |
Numeric Keypad | Move the pan point to a corner, edge, or center of the Surround Panner (when the pan point is selected) |
Ctrl+Numeric Keypad 1,3,7,9 | Move the pan point to a corner on the largest circle that will fit in the Surround Panner (when the pan point is selected) |
Miscellaneous | |
F1 | Online Help |
Shft+F1 | What's this help |
Shft+F10 | Shortcut menu |
Ctrl+drag | Make fine fader/slider adjustments |
Alt+drag keyframes | Change relative keyframe spacing |
Alt+drag region tag | Move region without changing length |
Multimedia keyboard | |
Play/Pause | Play/Pause |
Shft+Play/Pause | Play from start |
Stop | Stop |
Mute | Mute track |
Shft+Mute | Mute track and remove other tracks from mute group |
Ctrl+Mute | Solo track |
Ctrl+Shft+Mute | Solo track and remove other tracks from solo group |
Volume Up/Down | Change audio track volume or video track compositing level (when focus is on track list) |
Shft + Volume Up/Down | Change audio track panning or video track fade-to-color setting (when focus is on track list) |
Next/Prev Track | Change track focus |
Mouse wheel shortcuts | |
Wheel | Zoom in/out |
Ctrl+wheel | Scroll vertically |
Shft+wheel | Scroll horizontally |
Ctrl+Shft+wheel | Move the cursor in small increments. Trim the selected event edge one pixel (if you're in edge-trimming mode). Adjust scrub rate during playback |
Ctrl+Alt+Shft+wheel | Move the cursor by frames. Trim the selected event edge one frame (if you're in edge-trimming mode). Adjust scrub rate during playback |
Click wheel button and move mouse | Auto-scroll |
In plug-in windows, click the ctrl first to giv | Move fader/slider (Hover over handle and use wheel) |
Ctrl+hover over fader and use wheel | Move fader/slider in fine increments |
comments powered by Disqus